{"id":17550,"date":"2024-10-23T13:34:51","date_gmt":"2024-10-23T04:34:51","guid":{"rendered":"https:\/\/ntkcuttingtools.com\/products\/uncategorized\/serie-hcc\/"},"modified":"2026-03-03T13:30:19","modified_gmt":"2026-03-03T04:30:19","slug":"serie-hcc","status":"publish","type":"products","link":"https:\/\/ntkcuttingtools.com\/es\/products\/cast-iron-unique-solutions-es\/serie-hcc\/","title":{"rendered":"Serie HCC"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\t\t
\n\t\t\t\t
\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Serie HCC<\/h1>\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t

Herramientas de fresado para el mecanizado de fundici\u00f3n gris y fundici\u00f3n d\u00factil | Plaquitas cer\u00e1micas<\/p>\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tFresado de alta eficacia de hierro fundido con NTK HCC\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\tInicio<\/a><\/span><\/span><\/span>\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Selecci\u00f3n de fresas NTK<\/h2>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\tMecanizado de fundici\u00f3n gris \/ d\u00factil\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t
\n\t\t
\n\t\t\t\t
\n\t\t\t\t\t
V\u00eddeo de instalaci\u00f3n<\/h5>\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
<\/div>\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Serie<\/span><\/th>\nCaracter\u00edsticas<\/span><\/th>\nCC<\/span><\/th>\nKAPR<\/span><\/th>\nAPMX<\/span><\/th>\n<\/tr>\n
\r\n mm<\/span>\r\n inch<\/span>\r\n <\/span><\/th>\n\u00b0<\/th>\n\r\n mm<\/span>\r\n inch<\/span>\r\n <\/span><\/th>\n<\/tr>\n
Serie JWNXM<\/td>\nBaja resistencia \u00d7 m\u00faltiples esquinas\n
    \n
  • Reduce el astillamiento del filo de la plaquita, habitual en el mecanizado del hierro fundido<\/li>\n
  • Ideal para mecanizar a trav\u00e9s de la escala<\/li>\n
  • El coste de utillaje se reduce utilizando la exclusiva plaquita de 6 esquinas.<\/li>\n<\/ul>\n<\/td>\n
\r\n \u230063 – 160<\/span>\r\n 2.48 – 6.23<\/span>\r\n <\/span><\/td>\n88\u00b0<\/td>\n\r\n -5.5<\/span>\r\n -.217<\/span>\r\n <\/span><\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
Serie JFDX<\/td>\nBajo coste \u00d7 versatilidad\n
    \n
  • Plaquitas de 8 esquinas extremadamente econ\u00f3micas<\/li>\n
  • Cubre varias aplicaciones con fresas de \u00e1ngulo de 45, 75 y 88 grados<\/li>\n
  • Tambi\u00e9n hay disponibles insertos cer\u00e1micos con rompevirutas y rascador<\/li>\n<\/ul>\n<\/td>\n
\r\n \u230063 – 160<\/span>\r\n 2.48 – 6.23<\/span>\r\n <\/span><\/td>\n45\u00b0,75\u00b0,88\u00b0<\/td>\n\r\n -6<\/span>\r\n -.240<\/span>\r\n <\/span><\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
Serie JXTM<\/td>\nGran rigidez\n
    \n
  • Es posible un gran DOC gracias al paso fino de las plaquitas, lo que se traduce en una mayor productividad<\/li>\n
  • La plaquita LNX viene con un rompevirutas especial para reducir la presi\u00f3n de la herramienta<\/li>\n
  • Cortadores para zurdos reci\u00e9n a\u00f1adidos<\/li>\n<\/ul>\n<\/td>\n
\r\n \u230080 – 125<\/span>\r\n 3.15 – 4.921<\/span>\r\n <\/span><\/td>\n88\u00b0<\/td>\n\r\n -8<\/span>\r\n -.315<\/span>\r\n <\/span><\/td>\n<\/tr>\n
\"\"<\/td>\n<\/tr>\n
Serie JQ<\/td>\nFresado de hombro \u00d7 Fresa de di\u00e1metro peque\u00f1o\n
    \n
  • Capaz de fresar hombros a 90 grados<\/li>\n
  • Una variedad de di\u00e1metros de fresa tan peque\u00f1os como \u230020mm<\/li>\n<\/ul>\n<\/td>\n
\r\n \u230020 – 80<\/span>\r\n .787 – 3.15<\/span>\r\n <\/span><\/td>\n90\u00b0<\/td>\n\r\n -8<\/span>\r\n -.315<\/span>\r\n <\/span><\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
Serie JSDW<\/td>\nBaja presi\u00f3n de la herramienta\n
    \n
  • Las plaquitas positivas reducen la presi\u00f3n de la herramienta y producen un excelente acabado superficial, adem\u00e1s de una larga vida \u00fatil de la herramienta<\/li>\n
  • Mejor para fresar piezas finas gracias a la presi\u00f3n reducida de la herramienta<\/li>\n<\/ul>\n<\/td>\n
\r\n \u230080 – 160<\/span>\r\n 3.15 – 6.23<\/span>\r\n <\/span><\/td>\n45\u00b0,75\u00b0<\/td>\n\r\n -6<\/span>\r\n -.240<\/span>\r\n <\/span><\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t
SX6 Cer\u00e1mica -Nitruro de Silicio Premium-<\/h5>\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Caracter\u00edsticas<\/p>\n\n

    \n \t
  • Excelente resistencia al desgaste en aplicaciones en las que aparece desgaste por entalladura<\/em><\/li>\n \t
  • Vida estable de la herramienta en las aplicaciones en las que se requiere resistencia al choque t\u00e9rmico : como el mecanizado WET o el fresado<\/em><\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t
    \n
    \n
    \n\n\n\n\n
    Material de trabajo<\/th>\nAplicaci\u00f3n<\/th>\nProp\u00f3sito<\/th>\n\r\n Cutting speed(m\/min)<\/span>\r\n Cutting speed(SFM)<\/span>\r\n <\/span><\/th>\n\r\n Feed(mm\/rev)<\/span>\r\n Feed(IPR\/IPT)<\/span>\r\n <\/span><\/th>\n\r\n Depth of cut(mm)<\/span>\r\n Depth of cut(inch)<\/span>\r\n <\/span><\/th>\nSECO<\/th>\nMOJADO<\/th>\n<\/tr>\n
    Hierro fundido<\/td>\nMilling<\/td>\n\u00c1spero<\/td>\n\r\n 450 – 1200<\/span>\r\n 1500\u20134200<\/span>\r\n <\/span><\/td>\n\r\n 0.07 – 0.2<\/span>\r\n .003\u2013.010<\/span>\r\n <\/span><\/td>\n\r\n 0.5 – 3.5<\/span>\r\n .020\u2013.140<\/span>\r\n <\/span><\/td>\n\u25cf<\/td>\n\u25cf<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t\t
    SP9 Cer\u00e1mica + Recubrimiento -Mecanizado de alta velocidad con bajas fuerzas de corte-.<\/h5>\t\t\t\t<\/div>\n\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Caracter\u00edsticas<\/p>\n\n

      \n \t
    • Excelente resistencia al desgaste y al astillado con cer\u00e1mica de alta resistencia recubierta por CVD a base de nitruro de silicio\n<\/em><\/li>\n \t
    • Consigue una menor presi\u00f3n de la herramienta con una preparaci\u00f3n m\u00ednima del filo<\/em><\/li>\n \t
    • Tambi\u00e9n se puede utilizar para el acabado<\/em><\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t
      \n
      \n
      \n\n\n\n\n\n
      Material de trabajo<\/th>\nAplicaci\u00f3n<\/th>\nProp\u00f3sito<\/th>\n\r\n Cutting speed (m\/min)<\/span>\r\n Cutting speed(SFM)<\/span>\r\n <\/span><\/th>\n\r\n Feed(mm\/rev)<\/span>\r\n Feed(IPR\/IPT)<\/span>\r\n <\/span><\/th>\n\r\n Depth of cut(mm)<\/span>\r\n Depth of cut(inch)<\/span>\r\n <\/span><\/th>\nSECO<\/th>\nMOJADO<\/th>\n<\/tr>\n
      Fundici\u00f3n gris<\/td>\nMilling<\/td>\nSemiacabado rugoso<\/td>\n\r\n 350 – 700<\/span>\r\n 1200\u20132500<\/span>\r\n <\/span><\/td>\n\r\n 0.07 – 0.25<\/span>\r\n .003\u2013.010<\/span>\r\n <\/span><\/td>\n\r\n -6.0<\/span>\r\n \u2013.240<\/span>\r\n <\/span><\/td>\n\u25cf<\/td>\n\u25cb<\/td>\n<\/tr>\n
      Fundici\u00f3n d\u00factil<\/td>\nMilling<\/td>\nSemiacabado rugoso<\/td>\n\r\n 400 – 800<\/span>\r\n 2100\u20133000<\/span>\r\n <\/span><\/td>\n\r\n 0.07 – 0.25<\/span>\r\n .003\u2013.010<\/span>\r\n <\/span><\/td>\n\r\n -6.0<\/span>\r\n \u2013.240<\/span>\r\n <\/span><\/td>\n\u25cf<\/td>\n\u25cb<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t
      \n\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t
      B30 CBN<\/h5>\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t\t\t\t\t\t

      Caracter\u00edsticas<\/p>\n\n

        \n \t
      • Excelente resistencia al desgaste gracias al alto contenido en CBN<\/em><\/li>\n \t
      • Dise\u00f1ado para el acabado de hierro fundido<\/em><\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t
        B52 CBN<\/h5>\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t

        Caracter\u00edsticas<\/p>\n\n

          \n \t
        • Excelente resistencia al desgaste gracias al contenido \u00f3ptimo de CBN con aglutinantes especiales de TiC<\/em><\/li>\n \t
        • Ideal para el acabado de fundici\u00f3n d\u00factil y cortes continuos para el acabado de materiales endurecidos<\/em><\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t
            \n \t
          • Inserto Rascador CBN: Se pueden instalar 1 \u00f3 2 plaquitas rascadoras CBN con plaquita cer\u00e1mica.<\/li>\n \t
          • Disponible para: Serie JQ – Insertos APCW
            Serie HVM – Insertos FDX
            Serie HSM – Insertos SDW<\/li>\n<\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t
            \n\t\t\t\t\t\t
            \n\t\t\t\t\n\t\t\t\t\t
            Mesa est\u00e1ndar con cenador compatible <\/div><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/i><\/span>\n\t\t\t<\/i><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
            \n\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            \n
            \n
            \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
            Cortador N\u00famero de art\u00edculo<\/span><\/th>\nEst\u00e1ndar montable<\/span><\/th>\n<\/tr>\n
            Tipo de cenador est\u00e1ndar<\/th>\nDi\u00e1metro del \u00e1rbol<\/th>\n<\/tr>\n
            JWNXM<\/td>\n\r\n \u230063<\/span>\r\n 2.5<\/span>\r\n <\/span><\/td>\nFMC<\/td>\n\r\n \u230022.0<\/span>\r\n .087<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u230080<\/span>\r\n 3.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230025.4<\/span>\r\n 1<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300100<\/span>\r\n 4.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230031.75<\/span>\r\n 1.25<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300125<\/span>\r\n 5.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230038.1<\/span>\r\n 1.5<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300160<\/span>\r\n 6.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230050.8<\/span>\r\n 2<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            JFDX<\/td>\n\r\n \u230063<\/span>\r\n 2.5<\/span>\r\n <\/span><\/td>\nFMC<\/td>\n\r\n \u230022.0<\/span>\r\n .087<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u230080<\/span>\r\n 3.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230025.4<\/span>\r\n 1<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300100<\/span>\r\n 4.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230031.75<\/span>\r\n 1.25<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300125<\/span>\r\n 5.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230038.1<\/span>\r\n 1.5<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            JSDW<\/td>\n\r\n \u230063<\/span>\r\n 2.5<\/span>\r\n <\/span><\/td>\nFMC<\/td>\n\r\n \u230022.0<\/span>\r\n .087<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u230080<\/span>\r\n 3.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230025.4<\/span>\r\n 1<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300100<\/span>\r\n 4.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230031.75<\/span>\r\n 1.25<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300125<\/span>\r\n 5.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230038.1<\/span>\r\n 1.5<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            JXTM<\/td>\n\r\n \u230080<\/span>\r\n 3.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230025.4<\/span>\r\n 1<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300100<\/span>\r\n 4.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230031.75<\/span>\r\n 1.25<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u2300125<\/span>\r\n 5.0<\/span>\r\n <\/span><\/td>\nFMA<\/td>\n\r\n \u230038.1<\/span>\r\n 1.5<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            JQTS<\/td>\n\r\n \u230040<\/span>\r\n 1.6<\/span>\r\n <\/span><\/td>\n<\/td>\n\r\n \u230016.0<\/span>\r\n 0.63<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u230050<\/span>\r\n 2.0<\/span>\r\n <\/span><\/td>\nFMC<\/td>\n\r\n \u230022.0<\/span>\r\n .087<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            \r\n \u230063<\/span>\r\n 2.5<\/span>\r\n <\/span><\/td>\nFMC<\/td>\n\r\n \u230022.0<\/span>\r\n .087<\/span>\r\n <\/span><\/td>\n<\/tr>\n
            JQTE<\/td>\n\r\n \u230020<\/span>\r\n 0.8<\/span>\r\n <\/span> \u203b<\/td>\n\r\n \u230020<\/span>\r\n 0.8\u201d<\/span>\r\n <\/span> Manguito de di\u00e1metro de agarre \u203b<\/td>\nDi\u00e1metro del v\u00e1stago \r\n \u230020<\/span>\r\n 0.8\u201d<\/span>\r\n <\/span> \u203b<\/td>\n<\/tr>\n
            \r\n \u230025<\/span>\r\n 1.0<\/span>\r\n <\/span> \u203b<\/td>\n\r\n \u230025<\/span>\r\n 1.0\u201d<\/span>\r\n <\/span> Manguito de di\u00e1metro de agarre \u203b<\/td>\nDi\u00e1metro del v\u00e1stago \r\n \u230025<\/span>\r\n 1.0\u201d<\/span>\r\n <\/span> \u203b<\/td>\n<\/tr>\n
            \r\n \u230032<\/span>\r\n 1.3\u201d<\/span>\r\n <\/span> \u203b<\/td>\n\r\n \u230032<\/span>\r\n 1.3\u201d<\/span>\r\n <\/span> Manguito de di\u00e1metro de agarre \u203b<\/td>\nDi\u00e1metro del v\u00e1stago \r\n \u230032<\/span>\r\n 1.3\u201d<\/span>\r\n <\/span> \u203b<\/td>\n<\/tr>\n
            \r\n \u230040<\/span>\r\n 1.6<\/span>\r\n <\/span> \u203b<\/td>\n\r\n \u230032<\/span>\r\n 1.3\u201d<\/span>\r\n <\/span> Manguito de di\u00e1metro de agarre \u203b<\/td>\nDi\u00e1metro del v\u00e1stago \r\n \u230032<\/span>\r\n 1.3\u201d<\/span>\r\n <\/span> \u203b<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>
            \n

            \u203bCuerpo de tipo tanque<\/p>\n\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t

            \n\t\t\t\t\n\t\t\t\t\t
            V\u00eddeo de instalaci\u00f3n <\/div><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/i><\/span>\n\t\t\t<\/i><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
            \n\t\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t
            \n\t\t\t
            <\/div>\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t
            \n\t\t\t
            <\/div>\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t
            \n\t\t\t
            <\/div>\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t
            \n\t\t\t\t\n\t\t\t\t\t
            Estudio de caso <\/div><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/i><\/span>\n\t\t\t<\/i><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
            \n\t\t
            \n\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n
            Aplicaci\u00f3n de fresado<\/th>\n<\/tr>\n
            \n
            \n \t
            Material :<\/dt>\n \t
            FC270<\/dd>\n<\/dl>\n<\/td>\n
            		\"\"<\/td>\n<\/tr>\n
            \n
            \n \t
            Velocidad de corte :<\/dt>\n \t
            \r\n 800 m\/min<\/span>\r\n 2600(SFM)<\/span>\r\n <\/span> (SX6)
            \r\n 140 m\/min<\/span>\r\n 460(SFM)<\/span>\r\n <\/span> (carburo de la competencia)<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Alimentaci\u00f3n :<\/dt>\n \t
            \r\n 0.06 mm\/t<\/span>\r\n .002(IPT)<\/span>\r\n <\/span> (SX6)
            \r\n 0.20 mm\/t<\/span>\r\n .008(IPT)<\/span>\r\n <\/span> (carburo de la competencia)<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Alimentaci\u00f3n :<\/dt>\n \t
            \r\n 1,400 mm\/min<\/span>\r\n 55(IPM)<\/span>\r\n <\/span> (SX6)
            \r\n 560 mm\/min<\/span>\r\n 22(IPM)<\/span>\r\n <\/span> (carburo de la competencia)<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            DOC :<\/dt>\n \t
            \r\n 1.5 mm<\/span>\r\n .060 inch<\/span>\r\n <\/span><\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Refrigerante :<\/dt>\n \t
            SECO<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            SX6<\/th>\n\n
            \n\n360 unidades \/ esquina\n\n<\/div><\/td>\n<\/tr>\n
            Plaquitas de metal duro de la competencia<\/th>\n\n
            \n\n260 unidades \/ esquina\n\n<\/div><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t

            El fresado de alta velocidad con cer\u00e1mica redujo significativamente el tiempo de ciclo en comparaci\u00f3n con las plaquitas de metal duro actuales. (El proceso de una sola pasada pas\u00f3 de 40 min. a 15 min.)\nSX6 consigui\u00f3 1,4 veces m\u00e1s vida \u00fatil de la herramienta. <\/p>\n\n

            Los costes de utillaje se reducen utilizando plaquitas negativas, aumentando el n\u00famero de esquinas.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n\n
            Tapa de la caja de transmisi\u00f3n<\/th>\n<\/tr>\n
            \n
            \n \t
            Material :<\/dt>\n \t
            FC250<\/dd>\n<\/dl>\n<\/td>\n
            		<\/td>\n<\/tr>\n
            \n
            \n \t
            Soporte :<\/dt>\n \t
            JFDX100-88-10R<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Insertar :<\/dt>\n \t
            SX6
            \r\n SNGN120412T02020<\/span>\r\n SNG433T0820<\/span>\r\n <\/span><\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Velocidad de corte :<\/dt>\n \t
            \r\n 600 m\/min<\/span>\r\n 2000(SFM)<\/span>\r\n <\/span> (SX6)
            \r\n 120 m\/min<\/span>\r\n 400(SFM)<\/span>\r\n <\/span> (carburo de la competencia)<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Revoluci\u00f3n :<\/dt>\n \t
            1910 min-1 (SX6)
            382 min-1 (carburo de la competencia)<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Alimentaci\u00f3n :<\/dt>\n \t
            \r\n 0.05 mm\/t<\/span>\r\n .002(IPT)<\/span>\r\n <\/span> (SX6)
            \r\n 0.10mm\/t<\/span>\r\n .004(IPT)<\/span>\r\n <\/span> (carburo de la competencia)<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            DOC :<\/dt>\n \t
            \r\n 3 mm<\/span>\r\n .12 inch<\/span>\r\n <\/span><\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Refrigerante :<\/dt>\n \t
            SECO<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            SX6<\/th>\n\n
            1,3 min<\/div><\/td>\n<\/tr>\n
            Plaquitas de metal duro de la competencia<\/th>\n\n
            5,4 min<\/div><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t

            En comparaci\u00f3n con las plaquitas de metal duro actuales, el mecanizado de alta velocidad con el soporte HCC ha conseguido una reducci\u00f3n significativa del tiempo de ciclo.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

            \n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n
            Caja de transmisi\u00f3n<\/th>\n<\/tr>\n
            \n
            \n \t
            Material :<\/dt>\n \t
            FC230<\/dd>\n<\/dl>\n<\/td>\n
            		<\/td>\n<\/tr>\n
            \n
            \n \t
            Titular :<\/dt>\n \t
            JWNXM125A3810R12<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Insertar :<\/dt>\n \t
            SX6
            \r\n WNX44-R12T01020<\/span>\r\n WNX44-R12T0420<\/span>\r\n <\/span><\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Velocidad de corte :<\/dt>\n \t
            \r\n 500 m\/min<\/span>\r\n 1600 (SFM)<\/span>\r\n <\/span> (SX6)
            \r\n 500 m\/min<\/span>\r\n 1600 (SFM)<\/span>\r\n <\/span> (carburo de la competencia)<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Alimentaci\u00f3n :<\/dt>\n \t
            \r\n 0.13 mm\/t<\/span>\r\n .005 (IPT)<\/span>\r\n <\/span> (SX6)
            \r\n 0.13 mm\/t<\/span>\r\n .005 (IPT)<\/span>\r\n <\/span> (carburo de la competencia)<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            DOC :<\/dt>\n \t
            \r\n 1 mm<\/span>\r\n .040 inch<\/span>\r\n <\/span><\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            \n
            \n \t
            Refrigerante :<\/dt>\n \t
            SECO<\/dd>\n<\/dl>\n<\/td>\n<\/tr>\n
            SX6<\/th>\n\n
            \n\n120 unidades \/ esquina\n\n<\/div><\/td>\n<\/tr>\n
            Plaquitas de metal duro de la competencia<\/th>\n\n
            \n\n60 unidades \/ esquina\n\n<\/div><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t

            En cuanto a la fresa de la competencia, tuvimos que cambiar las plaquitas por otras nuevas debido al avance del desgaste y a la menor fuerza de sujeci\u00f3n del material de trabajo despu\u00e9s de mecanizar 60 piezas.
            Esto se debi\u00f3 al aumento de la fuerza de sutura.<\/p>\n\n

            La NUEVA Fresa NTK “FU-HA MILL” consigui\u00f3 una longitud 2 veces mayor que la de la competencia.
            La baja fuerza de corte evit\u00f3 el problema que se produc\u00eda con las fresas de la competencia.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t

            \n\t\t\t\t\n\t\t\t\t\t
            Requisitos de potencia de la m\u00e1quina -Tabla de comprobaci\u00f3n r\u00e1pida- <\/div><\/span>\n\t\t\t\t\t\t\t\n\t\t\t<\/i><\/span>\n\t\t\t<\/i><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t
            C\u00e1lculo<\/h5>\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t

            \u203bSuponiendo que la fundici\u00f3n normal se mecaniza a una velocidad de corte de Vc=\r\n 800m\/min<\/span>\r\n 2600 SFM<\/span>\r\n <\/span><\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

            \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t
            \n\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            Serie JFDX<\/h6>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            Serie JSDW<\/h6>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            Serie JXTM<\/h6>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JFDX\r\n \u230063<\/span>\r\n 2.50\u201d<\/span>\r\n <\/span> – 6 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n4<\/td>\n6<\/td>\n7<\/td>\n9<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n7<\/td>\n11<\/td>\n14<\/td>\n17<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n11<\/td>\n16<\/td>\n22<\/td>\n26<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n14<\/td>\n22<\/td>\n29<\/td>\n35<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JSDW\r\n \u230063<\/span>\r\n 2.50\u201d<\/span>\r\n <\/span> – 4 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n3<\/td>\n4<\/td>\n6<\/td>\n7<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n6<\/td>\n9<\/td>\n12<\/td>\n14<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n9<\/td>\n13<\/td>\n18<\/td>\n22<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n12<\/td>\n18<\/td>\n24<\/td>\n29<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t
            \n\t\t\t
            <\/div>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JFDX\r\n \u230080<\/span>\r\n 3.0\u201d<\/span>\r\n <\/span> – 8 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n6<\/td>\n9<\/td>\n12<\/td>\n14<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n12<\/td>\n18<\/td>\n24<\/td>\n29<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n18<\/td>\n27<\/td>\n35<\/td>\n43<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n23<\/td>\n36<\/td>\n47<\/td>\n57<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JSDW\r\n \u230080<\/span>\r\n 3.0<\/span>\r\n <\/span> – 6 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n5<\/td>\n8<\/td>\n11<\/td>\n13<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n11<\/td>\n16<\/td>\n22<\/td>\n26<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n16<\/td>\n24<\/td>\n33<\/td>\n39<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n21<\/td>\n32<\/td>\n43<\/td>\n52<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JXTM\r\n \u230080<\/span>\r\n 3.0<\/span>\r\n <\/span> – 10 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 5<\/span>\r\n .20<\/span>\r\n <\/span><\/td>\n36<\/td>\n55<\/td>\n76<\/td>\n93<\/td>\n<\/tr>\n
            \r\n 6<\/span>\r\n .24<\/span>\r\n <\/span><\/td>\n43<\/td>\n66<\/td>\n91<\/td>\n111<\/td>\n<\/tr>\n
            \r\n 7<\/span>\r\n .28<\/span>\r\n <\/span><\/td>\n50<\/td>\n76<\/td>\n106<\/td>\n130<\/td>\n<\/tr>\n
            \r\n 8<\/span>\r\n .31<\/span>\r\n <\/span><\/td>\n97<\/td>\n149<\/td>\n208<\/td>\n254<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JFDX\r\n \u2300100<\/span>\r\n 4.0\u201d<\/span>\r\n <\/span>-10 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n9<\/td>\n13<\/td>\n18<\/td>\n21<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n17<\/td>\n27<\/td>\n35<\/td>\n42<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n26<\/td>\n40<\/td>\n53<\/td>\n64<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n35<\/td>\n54<\/td>\n70<\/td>\n85<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JSDW\r\n \u2300100<\/span>\r\n 4.0\u201d<\/span>\r\n <\/span> – 7 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n7<\/td>\n10<\/td>\n14<\/td>\n17<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n14<\/td>\n20<\/td>\n27<\/td>\n33<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n20<\/td>\n31<\/td>\n41<\/td>\n50<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n27<\/td>\n41<\/td>\n55<\/td>\n66<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JXTM\r\n \u2300100<\/span>\r\n 4.0\u201d<\/span>\r\n <\/span> – 13 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 5<\/span>\r\n .20<\/span>\r\n <\/span><\/td>\n61<\/td>\n93<\/td>\n130<\/td>\n159<\/td>\n<\/tr>\n
            \r\n 6<\/span>\r\n .24<\/span>\r\n <\/span><\/td>\n73<\/td>\n112<\/td>\n156<\/td>\n190<\/td>\n<\/tr>\n
            \r\n 7<\/span>\r\n .28<\/span>\r\n <\/span><\/td>\n85<\/td>\n131<\/td>\n182<\/td>\n222<\/td>\n<\/tr>\n
            \r\n 8<\/span>\r\n .31<\/span>\r\n <\/span><\/td>\n97<\/td>\n149<\/td>\n208<\/td>\n254<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JFDX\r\n \u2300125<\/span>\r\n 5.0\u201d<\/span>\r\n <\/span> – 12 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n12<\/td>\n19<\/td>\n25<\/td>\n30<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n24<\/td>\n37<\/td>\n49<\/td>\n59<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n36<\/td>\n56<\/td>\n73<\/td>\n89<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n48<\/td>\n74<\/td>\n98<\/td>\n118<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JSDW\r\n \u2300125<\/span>\r\n 5.0\u201d<\/span>\r\n <\/span> – 8 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n8<\/td>\n13<\/td>\n17<\/td>\n20<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n17<\/td>\n25<\/td>\n34<\/td>\n41<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n25<\/td>\n38<\/td>\n51<\/td>\n61<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n33<\/td>\n50<\/td>\n68<\/td>\n82<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JXTM\r\n \u2300125<\/span>\r\n 5.0\u201d<\/span>\r\n <\/span> – 16 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 5<\/span>\r\n .20<\/span>\r\n <\/span><\/td>\n93<\/td>\n143<\/td>\n198<\/td>\n242<\/td>\n<\/tr>\n
            \r\n 6<\/span>\r\n .24<\/span>\r\n <\/span><\/td>\n111<\/td>\n171<\/td>\n238<\/td>\n291<\/td>\n<\/tr>\n
            \r\n 7<\/span>\r\n .28<\/span>\r\n <\/span><\/td>\n130<\/td>\n200<\/td>\n277<\/td>\n339<\/td>\n<\/tr>\n
            \r\n 8<\/span>\r\n .31<\/span>\r\n <\/span><\/td>\n148<\/td>\n228<\/td>\n317<\/td>\n387<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JFDX\r\n \u2300160<\/span>\r\n 6.0\u201d<\/span>\r\n <\/span> – 16 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n21<\/td>\n32<\/td>\n42<\/td>\n50<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n41<\/td>\n63<\/td>\n83<\/td>\n100<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n62<\/td>\n95<\/td>\n125<\/td>\n151<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n82<\/td>\n127<\/td>\n166<\/td>\n201<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            JSDW\r\n \u2300160<\/span>\r\n 6.0\u201d<\/span>\r\n <\/span> – 10 dientes<\/strong><\/section>
            \n
            \n
            \n\n\n\n\n\n\n\n\n
            <\/th>\n\r\n Feed rate per tooth (mm\/t)<\/span>\r\n Feed rate per tooth (IPT)<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            \r\n 0.1<\/span>\r\n .004<\/span>\r\n <\/span><\/th>\n\r\n 0.2<\/span>\r\n .008<\/span>\r\n <\/span><\/th>\n\r\n 0.3<\/span>\r\n .012<\/span>\r\n <\/span><\/th>\n\r\n 0.4<\/span>\r\n .016<\/span>\r\n <\/span><\/th>\n<\/tr>\n
            Profundidad de corte
            \r\n (mm)<\/span>\r\n (inch)<\/span>\r\n <\/span><\/td>\n            		\r\n 1<\/span>\r\n .04<\/span>\r\n <\/span><\/td>\n12<\/td>\n18<\/td>\n24<\/td>\n29<\/td>\n<\/tr>\n
            \r\n 2<\/span>\r\n .08<\/span>\r\n <\/span><\/td>\n24<\/td>\n36<\/td>\n49<\/td>\n59<\/td>\n<\/tr>\n
            \r\n 3<\/span>\r\n .12<\/span>\r\n <\/span><\/td>\n36<\/td>\n54<\/td>\n73<\/td>\n88<\/td>\n<\/tr>\n
            \r\n 4<\/span>\r\n .16<\/span>\r\n <\/span><\/td>\n48<\/td>\n72<\/td>\n97<\/td>\n117<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            \n

            Unidad: kW<\/p>\n

            *Por favor, utiliza las tablas anteriores, entendiendo que son s\u00f3lo aproximaciones para utilizarlas como gu\u00eda.<\/p>\n<\/section>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t

            \n\t\t\t\t\t
            Consejos para utilizar las tablas anteriores<\/h5>\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t\t\t\t\t\t
            \n
              \n \t
            • Se supone que la fundici\u00f3n gris se mecaniza a una velocidad de corte de \r\n 800m\/min<\/span>\r\n 2600 SFM<\/span>\r\n <\/span>, con el di\u00e1metro de la fresa indicado como anchura de corte (ae=<\/small> 100% del di\u00e1metro de la fresa).<\/li>\n \t
            • La potencia necesaria se reduce aproximadamente a la mitad (50%) si la anchura de corte ae<\/small> o la profundidad de corte se reducen a la mitad. (La potencia es proporcional a ae<\/small> oap<\/small>.) <\/li>\n \t
            • La potencia necesaria se reduce a aproximadamente un 60% si el n\u00famero de insertos se reduce a la mitad.<\/li>\n \t
            • Se recomiendan las m\u00e1quinas con una potencia de 22 kW o superior.<\/li>\n<\/ul>\n<\/section>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t
              \t\t
              \n\t\t\t\t
              \n\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t
              Noticias relacionadas<\/h5>\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t\t\t
              \n\t\t