For front turning operations ｜ Swiss CNC Lathes
| ISO | Work material | Grade | vc (m/min) (SFM) | ap (mm) (inch) | f (mm/rev) (IPR) |
|---|---|---|---|---|---|
 |
Carbon steel Alloy steel |
650 | 40 – 150 130 – 500 | 0.3 – 2.5 .012 – .100 | 0.02 – 0.15 .001 – .006 |
| DT4 DM4 |
|||||
| TM4 | 40 – 90 130 – 300 | ||||
| QM3 | 40 – 150 130 – 500 | ||||
 |
Difficult-to-cut Free-cutting stainless steel |
650 | 40 – 150 130 – 500 | 0.3 – 2.5 .012 – .100 | 0.02 – 0.15 .001 – .006 |
| ST4 | 40 – 180 130 – 600 | ||||
| DT4 DM4 |
40 – 100 130 – 330 | ||||
| TM4 | 40 – 90 130 – 300 | ||||
| QM3 | 30 – 90 100 – 300 | ||||
 |
HRSA Co-Cr alloy Titanium |
650 | 20 – 80 70 – 260 | 0.3 – 2.5 .012 – .100 | 0.02 – 0.15 .001 – .006 |
| HRSA Co-Cr alloy |
DT4 DM4 |
||||
 |
Non-ferrous metal | TM4 | 40 – 180 130 – 600 | 0.3 – 2.5 .012 – .100 | 0.02 – 0.15 .001 – .006 |
[ Cutting conditions ]
Material：
SUS304 ⌀16 Vc=80m/min
304SS ⌀.63” 260SFM
WET
[ Cutting conditions ]
Material：
SUS304 ⌀16 Vc=80m/min f= 0.05mm/rev ap = 2-3mm
304SS ⌀.63” 260SFM f= .002”IPR ap = .078”-.120”
WET
| Pin | |
|---|---|
|
 |
|
|
|
|
|
|
|
|
| YL chipbreaker |
3,000 pcs / corner
|
| Competitor’s PVD coated carbide |
2,000 pcs / corner
|
YL had good chip control and longer tool life than competitor’s conventional product. Also, achieved stable machining resulting in part dimensional consistency.
| Auto parts | |
|---|---|
|
 |
|
|
|
|
|
|
|
|
| YL chipbreaker + DM4 |
300 pcs / corner
|
| Competitor’s PVD coated carbide |
200 pcs / corner
|
YL achieved excellent chip control. Longer tool life and larger production run of parts with excellent surface finish compared to competitor’s insert.
For more information about this product, visit our online e-catalog, or download the catalog/product report
