Back turning ｜ Swiss CNC Lathes
| ISO | Work material | Grade | vc (m/min) (SFM) | ap (mm) (inch) | f (mm/rev) (IPR) | ||
|---|---|---|---|---|---|---|---|
| TBP-BM | TBPA-BM | X Direction | Z Direction | ||||
 |
Carbon steel Alloy steel |
DM4 | 30 – 120 100 – 400 | 0.5 – 3.5 .020 – .140 | 0.5 – 5.5 .020 – .220 | 0.01 – 0.03 .0004 – .0012 | 0.03 – 0.08 .0012 – .0031 |
 |
Stainless | ST4 | 50 – 120 160 – 400 | 0.5 – 3.5 .020 – .140 | 0.5 – 5.5 .020 – .220 | 0.01 – 0.03 .0004 – .0012 | 0.03 – 0.04 .0012 – .0016 |
| Difficult-to-cut material | DM4 | 30 – 120 100 – 400 | 0.01 – 0.03 .0004 – .0012 | 0.03 – 0.08 .0012 – .0031 | |||
 |
Titanium alloy High temp alloys |
DM4 | 30 – 120 100 – 400 | 0.5 – 3.5 .020 – .140 | 0.5 – 5.5 .020 – .220 | 0.01 – 0.03 .0004 – .0012 | 0.03 – 0.08 .0012 – .0031 |
 |
Hardened material | DM4 | 30 – 120 100 – 400 | 0.5 – 3.5 .020 – .140 | 0.5 – 5.5 .020 – .220 | 0.01 – 0.03 .0004 – .0012 | 0.03 – 0.08 .0012 – .0031 |
 |
Non-ferrous Aluminum Plastic General purpose |
TM4 | 50 – 180 160 – 600 | 0.5 – 3.5 .020 – .140 | 0.5 – 5.5 .020 – .220 | 0.01 – 0.03 .0004 – .0012 | 0.03 – 0.08 .0012 – .0031 |
| Stud | |
|---|---|
|
 |
|
|
|
|
|
|
| TBP-BM | ①1 pass machining * no extra operations required |
| Competitor’s product | ①Roughing – grooving operations ②Finishing – back turn operation |
For more information about this product, visit our online e-catalog, or download the catalog/product report
