
排屑槽外徑加工用 | 針對CNC走心車床設計
外徑加工首推排屑槽
可用於任何加工方向的全周排屑槽
兼顧「鋒利度」「強韌度」「切屑處理性能」 能應付各種加工條件,減少挑選刀具的作業時間
介紹動畫
性能
- 可對應切深 = 0.3 - 2.5 mm
- 兼顧「鋒利度」「強韌度」「切屑處理性能」的好用排屑槽
- 備有適合各種被切削材料的塗層材質
適用場合
CNC走心車床 外徑加工
YL切屑處理範圍

加工條件
Scroll the table →
塗層材質 | 被切削材料 | 加工方法 | 切削速度 (m/min) | 進給 (mm/rev) | 切深 (mm) |
---|---|---|---|---|---|
ST4 | 不鏽鋼 | 外徑車削加工 連續~斷續 |
50 - 120 | 0.03 - 0.15 | 0.3 - 2.5 |
QM3 | 合金鋼 / 碳化鋼 / 高硬度材料 | ||||
DM4/DT4 | 難切削材料 / 鈦合金 | 30 - 100 | |||
TM4 | 非鐵 / 鋁 / 塑膠 / 通用 | 50 - 180 |
切削照片與抗震刀性能

- [ 切削條件 ]
- 被切削材料:SUS304 φ16 Vc=80m/min WET

- [ 切削條件 ]
- 被切削材料:SUS304 φ16 Vc=80m/min f= 0.05mm/rev ap = 2-3mm WET
加工案例
插銷 | |
---|---|
|
![]() |
|
|
|
|
|
|
|
|
YL排屑槽 | 3,000個/刃 |
既有產品 (PVD塗層鎢鋼) | 2,000個/刃 |
YL排屑槽具備良好的切屑處理性能。相較既有產品,大幅延長的刀具加工壽命。 此外,能達到穩定加工,不需再修正尺寸。
汽車零件 | |
---|---|
|
![]() |
|
|
|
|
|
|
|
|
YL排屑槽 + DM4 | 300個/刃 |
他牌PVD塗層鎢鋼 | 200個/刃 |
YL排屑槽能有效發揮良好的切屑處理性能。 且與他牌既有產品相比,延緩因熔著影響工件面粗表現不佳、達到延長加工壽命的效果。
產品陣容
請參照產品目錄,查閱產品陣容
Useful information
4 STEP-NTK Cutting Tools Lab for choosing suitable cutting tool for cut-off machining
The aspects of "chip control" that you should check when workpiece damage or poor dimensioning are detected during Swiss type CNC automatic lathe machining
Two Areas to Check When Coaxiality is Not Achieved During Swiss CNC Lathe Machining
"Two" checkpoints and measures to be checked when "Roundness" does not come out in Swiss-type CNC-automatic lathe machining-NTK Cutting Tools Lab