NTK切削工具

HC1/HW2

灰铸铁连续加工| 氧化铝陶瓷(白色陶瓷)

关于灰铸铁表面处理的第一项建议
首页 / 铸铁 - 等级 / HC1/HW2

热稳定和化学稳定的氧化铝陶瓷混合物可实现高速性能

有效加工速度可达 Vc= ~700m/min 2300 SFM
Features
  • Best grade for high-speed finishing
  • HC1 grade – best wear resistance
  • HW2 grade – outstanding fracture resistance
Tooling application

Gray cast iron
Finish Turning

Grade characteristics
Gray cast iron finishing application
Special inserts for Poly V pulley machining
- - - Scroll the table - - -
Grade Material Operation type Machining Cutting speed (m/min) Cutting speed (SFM) Feed(mm/rev) Feed(IPR) DOC(mm) DOC(inch) Coolant
HC1 Gray cast iron Turning Finish turning of Gray cast iron 350 – 700 1200 -2300 0.1 – 0.4 .004 – .016 -2.0 – .080 DRY
HW2 Roughing to semi-interrupted finishing of gray cast Roughing to finishing of cylinder liners 350 – 600 1200 – 2100
Disk brake
Material :
FC250
Cutting speed :
630 m/min 2100 SFM
Feed :
0.3 mm/rev 0118 IPR
DOC :
0.5 mm .0197 inch
Coolant :
DRY
HC1
130 pcs / corner
Competitor’s black ceramic
60 pcs / corner

HC1 doubled the tool life of the competitor’s black ceramic.

Cylinder liner
Material :
Chilled iron
Cutting speed :
600 m/min 2000 SFM
Feed :
0.32 mm/rev .013 IPR
DOC :
3.0 mm .118 inch
Coolant :
DRY
HW2
70 pcs / corner
Competitor’s ceramic
30 pcs / corner

HW2 doubled the tool life and achieved superior surface finishes on the part compared to the competitor’s insert.

相关新闻
July 1, 2025
NTK Cutting Tools is proud to announce the launch of its new CBN grades series, ...
April 23, 2025
随着制动盘加工的不断发展,NTK 的陶瓷解决方案可提供更高的速度、更长的刀具寿命和更出色的表面光洁度,其性能优于传统的硬质合金刀具。SX6 和 SP9 确保高效的粗加工,而 HC1 和 HW2 则提供精密的精加工。NTK 陶瓷可减少磨损、加快生产、降低成本,为下一代制动盘加工设定了标准。 ...

For more information about this product, visit our online e-catalog, or download the catalog/product report

About
Solutions & Products
关于
解决方案和产品